Settings few explanations needed

**elvedeira**

Hi guy,

I've recently installed the gore mode on my Unix dedicated server and the plugin is correctly installed there is no issue on that site however I've let the settings in the cfg file by default except the gibs setting but I'd like to have more gore effect, bleeding the maximum (set the minimum hp lost to start bleeding etc...)
Could you please help me to put the correct values ?
For instance "Default 20, max HP to start bleeding." I don't know if the 20 correspond to the HP left or the HP lost.

For "Gore times this amount Min:1 Max:10" I don't know if it's it's the time that a player shot will keep bleeding also as the unit seems to be in minutes why do we have 10 knowing that a round is usually 3 minutes.

Thanks for your help

gore_log 0 //Enabled Logging.

gore_hpstart 20 //Default 20, max HP to start bleeding.

gore_time 5 //Time between bleeding.

gore_hsgibs 2 //Gibs on HS 1-Skull 2-All

gore_hsdoll 0 //1 Removes RagDoll on HS, 0 leaves it.

gore_exponent 1 //Gore times this amount Min:1 Max:10

gore_gibs 1 //Turn gibs on and off.

gore_bleed 1 //Turn bleeding on and off.

**Jay**

gore_hpstart is the health remaining when bleeding starts, so 50 would be half way, 25 would be nearly dead.

gore_exponent 10 makes more blood and gore per shot. Does not affect bleeding. It is just a multiplier.

That settle a few things ?

**elvedeira**

yep that's exactly what I wanted thanks

I'm gonna try with the settings and I'll let you know.
I fact there was not significant effects as guess as I let the gore_exponent to 1 in my previous config.

gore_exponent 10
gore_hpstart 80

By the way when you change settings in the cfg do you need to restart the server of the changemap is fine ?

Thanks

Post new topic Reply to topic	c0ld.net Forum Index › GoreMod	All times are GMT
Page 1 of 1